Evidence 1142 Trendelemburg

ANVISA REGISTERED PRODUCT BY N°: 81760590001

 

Our products are fabricated following the Inmetro norms standards:

 

- ABNT NBR IEC 60601-1:2010/AMD1:2016;

- ABNT NBR IEC 60601-1-2:2017;

- ABNT NBR IEC 60601-2-52:2013;

- ABNT NBR IEC 60601-1-6:2010/AMD1:2013;

- ABNT NBR IEC 60601-1-9:2010/AMD1:2014 (Items 4.1/4.5.2/4.5.3);

- ABNT NBR IEC 62366:2007/AMD 1:2014;

INMETRO ordinance n. 54 of 01/02/2016.

 

 

• Fowler bed with detachable headboards in HDPE (High-density polyethylene), thigh-strength injected thermoplastic;

• Bed chassis (superior) built in profiled carbon steel tubes;

• Articulated carbon steel tube bed-frame;

• Four spots to support IV drips;

• The headboards and footboards are made of high-strength injected thermoplastic HDPE (High-density polyethylene), equipped with a swivel system and retractable ones that allow the swivel down the bed;

• Fowler, semi fowler, sitting, legs flexing, vascular, bed elevation, trendelenburg and proclive movements executed by four linear actuators with control box, shielded with IPX6 degree of protection, acting at 110 / 220 volts (bi-volt);

• Surface treatment consists by process of pickling, degreasing, phosphating, powder electrostatic painting with epoxy-polyester resin, polymerized in an oven at 200 degrees centigrade, excellent chemical and mechanical resistance;

• Comes with 4" rotation, with diagonal double-acting brake;

• Bed chassis (inferior) built in profiled carbon steel tubes;

• Minimum and maximum bed height: 420mm to 720mm (from floor to bed base surface), with 4" rotation;

• Bed extender (reaching 2120mm of length);

• Power supply: 127/220 (bi-volt).

 

 

Bed:

 

• Length: 1900mm;

• Width: 900mm;

• Minimum height: 420mm;

• Maximum height: 720mm;

Notes: measurements with rotation of 4 inches.

 

 

Optionals:

 

1. Wall protectors, in the four corners of the bed (bumpers);

2. IV drips support;

3. Battery to drive movements in the event of a power outage;

4. 3” to 6” rotation;

5. Hospital mattress D23 to D55;

6. Weight bearing variation (280kg).

 

 

Consult our manual to view all the options available on this model.

 

NBTech reserves the right to change measurements and models of guardrails/footboards, without prior notice.