Concept 1721 Trendelemburg e CPR

ANVISA REGISTERED PRODUCT BY N°: 81760590001

 

Our products are fabricated following the Inmetro norms standards:

 

- ABNT NBR IEC 60601-1:2010/AMD1:2016; 

- ABNT NBR IEC 60601-1-2:2017;

- ABNT NBR IEC 60601-2-52:2013;

- ABNT NBR IEC 60601-1-6:2010/AMD1:2013;

- ABNT NBR IEC 60601-1-9:2010/AMD1:2014 (Items 4.1/4.5.2/4.5.3);

- ABNT NBR IEC 62366:2007/AMD 1:2014;

INMETRO ordinance n. 54 of 01/02/2016.

 

 

• Fowler bed with detachable headboards in HDPE (High-density polyethylene), thigh-strength injected thermoplastic;

• Bed chassis (superior) built in profiled carbon steel tubes;

• Articulated carbon steel tube ABNT 1020 bed-frame;

• Four spots to support IV drips;

• Four side rails in HDPE (High-density polyethylene), thigh-strength injected thermoplastic with linear retraction system, through pneumatic shock absorbers that allow the retraction to the bed, facilitating the transfer of the patient, with lock and unlock security system;

• Fowler, semi fowler, sitting, legs flexing, vascular, trendelenburg and proclive movements executed by four linear actuators with control box, shielded with IPX6 degree of protection. Display with indication of the tilt angle fixed on the sides;

• CPR function – Activation lever for use in emergency situations, ensuring that the bed is positioned in any position for rapid cardiopulmonary recovery (“CPR”). The CPR Lever acts with mechanical release that allows the bed to be in a horizontal position to carry out emergency procedures (cardio-respiratory stop);

• Surface treatment consists by process of pickling, degreasing, phosphating, powder electrostatic painting with epoxy-polyester resin, polymerized in an oven at 200 degrees centigrade, excellent chemical and mechanical resistance;

• Motorization with IPX6 protection degree;

• Comes with 4" rotation, with diagonal double-acting brake (see optional items);

• Bed chassis (inferior) built in profiled carbon steel tubes, covered by fairing;

• Minimum bed height of 410mm and maximum 710mm (from floor to bed base surface) – with 4" rotation (100mm) or minimum 460mm and maximum 770mm with 6" rotation (150mm);

• Bed subdivided into 4 sections, one fixed and 3 movable;

• Bed extender (useful space from 1900mm to 2170mm);

• Alimentação elétrica: 100-240V – 50/60 Hz - (bivolt);

• Capacidade máxima: 280Kg (distribuído sobre o leito).

 

 

Bed:

 

• Length (useful area): 1900mm;

• Width(useful area) : 900mm;

• Minimum height: 410mm;

• Maximum height: 710mm;

Notes: measurements with rotation of 4 inches (100mm).

 

 

Optionals:

 

1. Wall protectors, in the four corners of the bed (bumpers);

2. IV drips support;

3. Battery to drive movements in the event of a power outage;

4. 6” to 10” rotation;

5. Hospital mattress;

6. Protection base (fairing).

 

 

Movements:

 

The movements are carried out by pressing the buttons of the handheld remote control (IPX6 protection degree).