Concept 1533 Trendelenburg

ANVISA REGISTERED PRODUCT BY N°: 81760590001

 

Our products are fabricated following the Inmetro norms standards:

 

- ABNT NBR IEC 60601-1:2010/AMD1:2016; 

- ABNT NBR IEC 60601-1-2:2017;

- ABNT NBR IEC 60601-2-52:2013;

- ABNT NBR IEC 60601-1-6:2010/AMD1:2013;

- ABNT NBR IEC 60601-1-9:2010/AMD1:2014 (Items 4.1/4.5.2/4.5.3);

- ABNT NBR IEC 62366:2007/AMD 1:2014;

INMETRO ordinance n. 54 of 01/02/2016.

 

 

• Fowler bed with detachable headboards in HDPE (High-density polyethylene), thigh-strength injected thermoplastic;

• Bed chassis (superior) built in profiled carbon steel tubes;

• Articulated carbon steel tube ABNT 1020 of 1,5 mm of thickness bed-frame;

• Four spots to support IV drips;

• Four side rails in HDPE (High-density polyethylene), thigh-strength injected thermoplastic with linear retraction system, through pneumatic shock absorbers that allow the retraction to the bed, facilitating the transfer of the patient, with lock and unlock security system;

• Fowler, semi fowler, sitting, legs flexing, vascular, trendelenburg and proclive movements executed by four linear actuators with control box, shielded with IPX6 degree of protection;

• Surface treatment consists by process of pickling, degreasing, phosphating, powder electrostatic painting with epoxy-polyester resin, polymerized in an oven at 200 degrees centigrade, excellent chemical and mechanical resistance;

• Motorization with IPX6 protection degree;

• Comes with 4" rotation, with diagonal double-acting brake (see optional items); 

• Bed chassis (inferior) built in profiled carbon steel tubes, covered by fairing;

• Minimum bed height of 410mm and maximum 710mm (from floor to bed base surface) – with 4" rotation (100mm) or minimum 460mm and maximum 770mm with 6" rotation (150mm);

• Bed subdivided into 4 sections, one fixed and 3 movable;

• Bed extender (useful space from 1900mm to2170mm);

• Power supply: 100-240V – 50/60 Hz - (bi-volt);

• Maximum capacity: 280kg (distributed over te bed).

 

 

Bed:

 

• Length(useful area): 1900mm;

• Width (useful area): 900mm;

• Minimum height: 410mm;

• Maximum height: 710mm;

Notes: measurements with rotation of 4 inches (100mm).

 

 

Optionals:

 

1. Wall protectors, in the four corners of the bed (bumpers);

2. IV drips support;

3. Battery to drive movements in the event of a power outage;

4. 6” to 10” rotation;

5. Hospital mattress;

6. Protection base (fairing).

 

 

Movements:

 

The movements are carried out by pressing the buttons of the handheld remote control (IPX6 protection degree).